![product](https://www.simplefabrica.it/wp-content/uploads/2020/09/product.png)
H-Fog
QUICK INSTALLATION GUIDE
THE FIRST SYSTEM
FOR THE AUTOMATED
SANITIZATION
BLOCKCHAIN
CERTIFIED
SAFETY WARNINGS
IMPORTANT PRECAUTIONS FOR USE
![](https://www.simplefabrica.it/wp-content/uploads/2021/03/warning.jpg)
WARNING! BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL
Simple Group AG declines all liability for any accident deriving from any improper use of this appliance.
Correct use of the product is only as detailed in this instruction manual.
H-Fog is a Device for Professional Use. Operators have to be properly trained before using the H-Fog Vaporizer.
Any use which does not comply with these instructions will invalidate the warranty.
Should the Packaging show signs of damage please contact the Manufacturer or the After Sales Local Service in order to let them check if the product has been damaged before using the product.
ATTENTION: make sure that no obstacles or walls will be in front of H-Fog at a distance if less than 4 meters and that humidity level will be lower than 65%.
SAFETY SYMBOLS:
![](https://www.simplefabrica.it/wp-content/uploads/2021/03/hotarea-copia.jpg)
WARNING: High temperature. Risk of scalding! If shown on the product, do not touch as parts may be very hot.
![](https://www.simplefabrica.it/wp-content/uploads/2021/03/waring2.jpg)
WARNING: Steam. Risk of scalding!
This appliance reaches very high temperatures. Incorrect use of the device can cause scalding.
• Never disassemble or carry out maintenance on the appliance apart from that indicated in this manual. In the event of a fault or malfunction, do not try and repair the appliance yourself. Incorrect use or a lack of respect for the instructions herein may lead to serious accidents. Always contact Authorised Service Centres.
• This appliance must not be used if it has been dropped, if there are visible signs of damage or if it leaks.
• The plug must be removed from the socket before the appliance is for maintenance or reparations.
• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should be supervised to ensure that they do not play with the appliance.
• Keep the appliance out of reach of children when it is plugged in and until it has completely cooled down.
• Keep all the parts of the packaging out of the reach of children; they are not toys. Keep the plastic bag out of the reach of children: danger of suffocation.
• This appliance is destined exclusively for professional use.
• In order to reduce the risk of accidents, including: fires, electrocution, personal injury and scalding, both during use and during configurations, maintenance and storage of H-Fog, always take the basic precautions listed in this manual.
RISKS CONNECTED TO THE POWER SUPPLY ELECTROCUTION
• The earthing system and highly sensitive residual-current circuit breaker, complete with magnetothermic cut-out for your domestic system, guarantee safe use of electrical appliances. Therefore, for your own safety, check that the electrical system to which the appliance is connected complies with current laws.
• Do not connect the appliance to the mains if the voltage does not correspond with that of the domestic electrical circuit in use.
• Do not overload sockets with adaptors and/or transformers. Only connect the product to a single socket with current that is compatible with the plug supplied.
• Electrical extension leads that are unsuitable for the power rating or which are not compliant with law may overheat and possibly lead to short circuiting, fire, power outage or damage to the equipment. Only use extension leads which are certified, suitable for the power rating, supporting 16A and earthed.
• To remove the plug from the socket, do not pull the power cable, but hold the plug itself to avoid damage to the plug and the cable.
• On out user maintenance on the appliance.
• Do not pull or jerk the cable or expose it to tensions (twisting, crushing or stretching). Keep the cable away from hot and/or sharp surfaces and elements. Avoid crushing the cables in doors and windows. Do not pull the cable tight around corners. Avoid treading on the cable.
• A hazard may occur if the appliance runs over the supply cord.
• Do not substitute the plug on the power cable.
• If the power cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid all possible hazards. Do not use the product if the power cable is damaged.
• Do not touch or use the appliance barefoot and/or with wet body or feet.
RISKS DURING USE OF THE PRODUCT INJURIES/SCALDING
• The product should not be used in areas where there is a danger of explosions or in the presence of toxic substances.
• The product can be used only with original H-Fog Smart Bags.
• Only pour water or the water mix indicated in the section “WHICH WATER TO USE” into the tank.
• Do not direct the steam jet onto explosive powders or liquids, hydrocarbons, open flames and or extremely hot objects.
• Do not position the product near sources of heat such as fireplaces, stoves and ovens.
• Do not obstruct the openings and grills on the product.
• Do not position the product near electromagnetic fields such as induction plates.
• Do not place the product on delicate surfaces that are not heat or moisture resistant.
• During use, the product must be properly fixed on the wall or an authorized mobile trolleys.
• Do not touch the area from which the steam from the internal heater.
INSTALLATION
ATTENTION: installation of the device has to be performed by Authorized installer.
1
![LogoSmile_simplegroup LogoSmile_simplegroup](https://www.simplefabrica.it/wp-content/uploads/2020/02/img_logo_simple.png)
OPENING H-FOG
To install H-Fog on the wall it is necessary to Open it and separate the Body/Front Panel from the BACK PANEL. Insert the metallic tool in the small flat SLOT, push on the left side and pull the Drawer out.
2
![LogoSmile_simplegroup LogoSmile_simplegroup](https://www.simplefabrica.it/wp-content/uploads/2020/02/img_logo_simple.png)
REMOVING THE DRAWER
Once the Drawer is pulled till the end, move it upwords for few millimeters and pull it by rotating it towards you.
3
![LogoSmile_simplegroup LogoSmile_simplegroup](https://www.simplefabrica.it/wp-content/uploads/2020/02/img_logo_simple.png)
UNLOCKING THE BODY/FRONT PANEL
Inside H-Fog the BODY/FRONT PANEL is fixed to the BACK PANEL through two Plastic Hooks (one on the left, one on the right). Pull them towards you and put them in the Drawer. Now it is possible to remove the BODY/GLASS front panel by rotating it upside.
WARNING: BEFORE REMOVING THE BODY/FRONT PANEL MAKE SURE THAT H-FOG IS NOT CONNECTED TO THE POWER SOCKET.
![simple_5](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_5-291x300.jpg)
![simple_6](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_6-291x300.jpg)
4
![LogoSmile_simplegroup LogoSmile_simplegroup](https://www.simplefabrica.it/wp-content/uploads/2020/02/img_logo_simple.png)
MOUNTING THE BRACKET
In the Package you find a Bracket composed by three elements: 2 vertical ones (Black Colour) and one horizontal (white color). Connect them as shown in the picture with the 6 screws.
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_7-291x300.jpg)
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/03/simple_7.jpg)
5
![LogoSmile_simplegroup LogoSmile_simplegroup](https://www.simplefabrica.it/wp-content/uploads/2020/02/img_logo_simple.png)
FIXING THE BRACKET ON THE DESIRED POSITION ON THE WALL
Find the best barycentric position within the room to be sanitized, place the lower side of thebracket at a 160 centimeters hight and make sure that in the range of 110 centimeters there will be a power socket available to plug in the H-Fog device. The bracket has to be fixed with 6 Screws / and corresponding wall fixing expanders units supplied by drilling the holes on the wall with a Drill BIT with 6mm diameter.
ATTENTION: make sure that the wall structure is suitable to hold the weight of the device and it doesnt have any metallic material inside
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/03/simple_7-1.jpg)
6
![LogoSmile_simplegroup LogoSmile_simplegroup](https://www.simplefabrica.it/wp-content/uploads/2020/02/img_logo_simple.png)
HANGING H-FOG BACK PANEL ON
THE BRACKET
ATTENTION: this operation has to be done in two people: one guiding the H-Fog Device to get into the HOOKS of the Braket, the other one keeping lift the H-Fog device for security reasons and to avoid dangerous fall down of the product. DON’T proceed with this STEP alone.
Step 1: Hang H-Fog unit to the Bracket and fix it with the two Screws provided. Using the holes shown by the red arrows.
![simple_10](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_10.jpg)
Step 2: identify the holes in the back part of H-FOG to be hanged on the Hooks of the BRACKET and Insert H-Fog into them
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/03/simple_7-2.jpg)
![simple_11](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_11.jpg)
Step 3: Mount the BODY with the Glass Front Panel on the H-Fog Back Panel guides on the top side of the product and then LOCK it with the two Plastic guides.
Let the Power Cord come out from the hole on the right bottom side of the BODY.
![simple_12](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_12.jpg)
![simple_13](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_13.jpg)
7
![LogoSmile_simplegroup LogoSmile_simplegroup](https://www.simplefabrica.it/wp-content/uploads/2020/02/img_logo_simple.png)
MOUNT BACK THE DRAWER INTO THE BACK PANEL
Mount back the Drawer into the Back Panel. Please insert the two Guides of the Drawer into the corresponding SLOTS with a 45 degree positioning of the DRAWER, then flip it downwards. Now you can slide the DRAWER up and down.
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/03/simple_7-3.jpg)
![simple_16](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_16.jpg)
8
![LogoSmile_simplegroup LogoSmile_simplegroup](https://www.simplefabrica.it/wp-content/uploads/2020/02/img_logo_simple.png)
INSTALLATION OF H-FOG DISINFECTING LIQUID SMART BAG
ATTENTION: please wear protective gloves and protective glasses during this operation
To connect the H-Fog SMART BAG with the Disinfecting Liquid inside the H-Fog device, UNLOCK the DRAWER by using the related tool.
(insert the tool in the slot then move it on the right or left side and then pull it back to extract the drawer).
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/03/simple_7-4.jpg)
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/03/simple_7-7.jpg)
Connect the H-Fog SMART BAG to the Female Insert of the Internal Pipe, then position the H-Fog SMART BAG inside the Drawer making sure that the Insert is placed on the bottom left part of the Drawer. Then push upwards the Drawer to close it back and lock it.
Please don’t hold and lift the BAG from the Insert: it may be disconnect itself from the BAG and leave the liquid coming outside
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/03/simple_7-6.jpg)
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/03/simple_7-5.jpg)
9
![LogoSmile_simplegroup LogoSmile_simplegroup](https://www.simplefabrica.it/wp-content/uploads/2020/02/img_logo_simple.png)
CONNECT H-FOG TO THE 230V POWER SOCKET
Now is the time to Power the H-Fog Device: in few seconds you should hear 3 bips which are confirming that H-Fog is ready to be configured!
![simple_20](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_20.jpg)
CONFIGURATION
H-Fog must to be configured in order to get connected through internet to the H-Fog portal.
CONNECTING H-FOG to the WI-FI Network
H-Fog can operate ONLY if it is connected through Internet on the SIMPLE H-Fog portal through the credentials provided.
1. By using any Computer, Tablet or Smartphone the first action is to connect to the H-Fog internal access point whose name starts with “H-Fog” followed by a serie of numbers (the password required to access the internal access point is “password”).
2. Once connected to the internal Access point either the configuration page is shown automatically through the WIFI settings menu or simply SETUP.COM has to be typed on the browser.
3. Then simply choose the Wi-Fi network you want to connect the H-Fog device to (making sure that the signal level is > than -60dB) and input the password required by the WI-FI network choosen.
ATTENTION: should the H-Fog device doesn’t result “on line” on the SIMPLE H-Fog portal, please check that:
NO FIREWALLS on the Wi-Fi network will block the port 3333 which is necessary for the H-Fog device to communicate with the H-Fog portal.
ftp standard port 21 and other ports possibly used by ftp “passive data mode” should not be blocked
EXECUTING TREATMENTS
Once connected into the admin.simplefabrica.it portal the device can be managed through the H-FOG APP (Please follow the detailed Instruction of the H.FOG APP to properly use the H-FOG devices)
Before starting any treatment all the Rooms of the building where the treatment has t be executed have to be created inside the H-Fog APP and properly configured in terms of volume ( width, length and height measures have to be input with decimals separated by a dot (.)
H-Fog based on the defined volume execute the administration treatments in line with the performance performance certifications based on the EN17272:2020 Norm.
![schermata_simple](https://www.simplefabrica.it/wp-content/uploads/2021/03/schermata_simple.jpg)
![wifi_1](https://www.simplefabrica.it/wp-content/uploads/2021/03/wifi_1.jpg)
USE
Before starting sanitization treatments all the surfaces have to be carefully cleaned and organic residue have to be re- moved. Personnel authorized to execute a treatment has to be properly trained and have to get a formal Certificate issued by the Security responsible of the company confirming that he got all the instructions and knowledge to run in a secure way the execution of the treatments.
The H-FOG Security Procedure has to be carefully respected and followed.
Starting a Treatment
PRE- REQUISITES TO START A TREATMENT:
1. Preliminary Manual Cleaning and Removing of Organic Residue has to be done by the cleaning personnel
2. All windows have to be closed
3. Any Air Ventilation or Air Exhausters have to be turned OFF for the entire period of the treatment and the following 15 minutes after the treatment.
4. The operator has the responsibility to confirm that NO persons or animals remained inside the room subject to treatment
5. All entry doors of the room subject to treatment have to be closed and sealed.
DURING THE TREATMENT:
1. It is not possible for anybody to enter the room after the treatment until a 60 minutes period has elapsed from the start of the treatment.
2. Specialized Operators can enter after the first 15 minutes ONLY with proper Personal Protection Devices to protect mouth, eyes and hands.
AFTER THE TREATMENT
1. Preferably a Sealing Sticker has to be placed on the entry door indicating the re-entry time (60 minutes after the start of the treatment).
Follow the step by step instructions on the H-Fog APP or on the H-Fog Portal to properly run a Sanitization Treatment.
ATTENTION: until the status “NO EN- TRY” is shown on the H-Fog APP or H-Fog Portal, it is forbidden for any person or animal entering the room where the treatment has been exe- cuted.
![simple_23](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_23.jpg)
![simple_24](https://www.simplefabrica.it/wp-content/uploads/2021/01/simple_24.jpg)
Viewing the Blockchain Certification
After each treatment been executed it is possible to scan with any smartphone through the camera the QR code placed in the front panel or in the other Stickers provided together with H-Fog unit (which can be placed on Displays or on the entry door) to visualize the full Blockchain certificate.
![simple_7](https://www.simplefabrica.it/wp-content/uploads/2021/03/simple_7-1.png)
Note
The Blockchain Certificate of the last treatment executed will be available after a period of few minutes following the Expiration of the NO ENTRY time as indicated by the H-Fog APP..
SUPPORT
For any technical support support@simplefabrica.it
INFORMATION FOR USERS
Pursuant to European Directive 2012/19/EU, regarding electric and electronic appliances, this appliance must not be disposed of with domestic waste, but sent to an official collection facility. This appliance complies with EU Directive 2011/65/EU. The crossed-out bin symbol on the appliance indicates that, at the end of its useful lifespan, the product must be disposed of separately from other waste. Therefore, at the end of its life, the user must hand over the appliance to an appropriate collection centre for electric and electronic waste or, according to the legislation in force in the country, leave the used appliance with the distributor when buying a new product to replace it. Proper separate waste collection to facilitate the subsequent recycling, treatment and environmentally compatible disposal of the appliance helps to prevent negative effects on the environment and human health, and promotes recycling of the materials the product is made of. Unlawful disposal by the owner involves the application of the administrative sanctions envisaged by current legislation.
With reference to the H-Fog Smart Bags containing Disinfecting Liquid, such products have to be sent to authroized disposal plants or incineration under controlled conditions. In so doing, comply with the local and national regulations currently in force. Do not discharge into the ground or into drains.